[Up] [Previous] [Next] [Index]

4 Noninitial automata

Sections

  1. Definition
  2. Tools

In this chapter we present the functionality applicable to noninitial automata.

4.1 Definition

  • MealyAutomaton( table[, names[, alphabet]] ) O
  • MealyAutomaton( string ) O
  • MealyAutomaton( autom ) O
  • MealyAutomaton( tree_hom_list ) O
  • MealyAutomaton( list, name_func ) O
  • MealyAutomaton( list, true ) O

    Creates the Mealy automaton (see Short math background) defined by the argument table, string or autom. Format of the argument table is the following: it is a list of states, where each state is a list of positive integers which represent transition function at the given state and a permutation or transformation which represent the output function at this state. Format of the string string is the same as in AutomatonGroup (see AutomatonGroup). The third form of this operation takes a tree homomorphism autom as its argument. It returns noninitial automaton constructed from the sections of autom, whose first state corresponds to autom itself. The fourth form creates a noninitial automaton constructed of the states of all tree homomorphisms from the tree_hom_list.

    gap> A := MealyAutomaton([[1,2,(1,2)],[3,1,()],[3,3,(1,2)]], ["a","b","c"]);
    <automaton>
    gap> Display(A);
    a = (a, b)(1,2), b = (c, a), c = (c, c)(1,2)
    gap> B:=MealyAutomaton([[1,2,Transformation([1,1])],[3,1,()],[3,3,(1,2)]],["a","b","c"]);
    <automaton>
    gap> Display(B);
    a = (a, b)[ 1, 1 ], b = (c, a), c = (c, c)[ 2, 1 ]
    gap> D := MealyAutomaton("a=(a,b)(1,2), b=(b,a)");
    <automaton>
    gap> Display(D);
    a = (a, b)(1,2), b = (b, a)
    gap> Basilica := AutomatonGroup( "u=(v,1)(1,2), v=(u,1)" );
    < u, v >
    gap> M := MealyAutomaton(u*v*u^-3);
    <automaton>
    gap> Display(M);
    a1 = (a2, a5), a2 = (a3, a4), a3 = (a4, a2)(1,2), a4 = (a4, a4), a5 = (a6, a3)
    (1,2), a6 = (a7, a4), a7 = (a6, a4)(1,2)
    

    If list consists of tree homomorphisms, it creates a noninitial automaton constructed of their states. If name_func is a function then it is used to name the states of the newly constructed automaton. If it is true then states of automata from the list are used. If it false then new states are named a_1, a_2, etc.

    gap> G := AutomatonGroup("a=(b,a),b=(b,a)(1,2)");
    < a, b >
    gap> MealyAutomaton([a*b]);; Display(last);
    a1 = (a2, a4)(1,2), a2 = (a3, a1), a3 = (a3, a1)(1,2), a4 = (a2, a4)
    gap> MealyAutomaton([a*b], true);; Display(last);
    <a*b> = (<b^2>, <a^2>)(1,2), <b^2> = (<b*a>, <a*b>), <b*a> = (<b*a>, <a*b>)(1,2), <a^2> = (<b^2>, <a^2>)
    gap> MealyAutomaton([a*b], String);; Display(last);
    a*b = (b^2, a^2)(1,2), b^2 = (b*a, a*b), b*a = (b*a, a*b)(1,2), a^2 = (b^2, a^2)
    

  • IsMealyAutomaton( A ) C

    A category of non-initial finite Mealy automata with the same input and output alphabet.

  • NumberOfStates( A ) A

    Returns the number of states of the automaton A.

  • SizeOfAlphabet( A ) A

    Returns the number of letters in the alphabet the automaton A acts on.

  • AutomatonList( A ) A

    Returns the list of A acceptable by MealyAutomaton (see MealyAutomaton)

    4.2 Tools

  • IsTrivial( A ) P

    Computes whether the automaton A is equivalent to the trivial automaton.

    gap> A := MealyAutomaton("a=(c,c), b=(a,b), c=(b,a)");
    <automaton>
    gap> IsTrivial(A);
    true
    

  • IsInvertible( A ) P

    Is true if A is invertible and false otherwise.

  • MinimizationOfAutomaton( A ) F

    Returns the automaton obtained from automaton A by minimization. The implementation of this function was significantly optimized by Andrey Russev starting from Version 1.3.

    gap> B := MealyAutomaton("a=(1,a)(1,2), b=(1,a)(1,2), c=(a,b), d=(a,b)");
    <automaton>
    gap> C := MinimizationOfAutomaton(B);
    <automaton>
    gap> Display(C);
    a = (1, a)(1,2), c = (a, a), 1 = (1, 1)
    

  • MinimizationOfAutomatonTrack( A ) F

    Returns the list [A_new, new_via_old, old_via_new], where A_new is an automaton obtained from automaton A by minimization, new_via_old describes how new states are expressed in terms of the old ones, and old_via_new describes how old states are expressed in terms of the new ones. The implementation of this function was significantly optimized by Andrey Russev starting from Version 1.3.

    gap> B := MealyAutomaton("a=(1,a)(1,2), b=(1,a)(1,2), c=(a,b), d=(a,b)");
    <automaton>
    gap> B_min := MinimizationOfAutomatonTrack(B);
    [ <automaton>, [ 1, 3, 5 ], [ 1, 1, 2, 2, 3 ] ]
    gap> Display(B_min[1]);
    a = (1, a)(1,2), c = (a, a), 1 = (1, 1)
    

  • IsOfPolynomialGrowth( A ) P

    Determines whether the automaton A has polynomial growth in terms of Sidki Sid00.

    See also IsBounded (IsBounded) and PolynomialDegreeOfGrowth (PolynomialDegreeOfGrowth).

    gap> B := MealyAutomaton("a=(b,1)(1,2), b=(a,1)");
    <automaton>
    gap> IsOfPolynomialGrowth(B);
    true
    gap> D := MealyAutomaton("a=(a,b)(1,2), b=(b,a)");
    <automaton>
    gap> IsOfPolynomialGrowth(D);
    false
    

  • IsBounded( A ) P

    Determines whether the automaton A is bounded in terms of Sidki Sid00.

    See also IsOfPolynomialGrowth (IsOfPolynomialGrowth) and PolynomialDegreeOfGrowth (PolynomialDegreeOfGrowth).

    gap> B := MealyAutomaton("a=(b,1)(1,2), b=(a,1)");
    <automaton>
    gap> IsBounded(B);
    true
    gap> C := MealyAutomaton("a=(a,b)(1,2), b=(b,c), c=(c,1)(1,2)");
    <automaton>
    gap> IsBounded(C);
    false
    

  • PolynomialDegreeOfGrowth( A ) A

    For an automaton A of polynomial growth in terms of Sidki Sid00 determines its degree of polynomial growth. This degree is 0 if and only if automaton is bounded. If the growth of automaton is exponential returns fail.

    See also IsOfPolynomialGrowth (IsOfPolynomialGrowth) and IsBounded (IsBounded).

    gap> B := MealyAutomaton("a=(b,1)(1,2), b=(a,1)");
    <automaton>
    gap> PolynomialDegreeOfGrowth(B);
    0
    gap> C := MealyAutomaton("a=(a,b)(1,2), b=(b,c), c=(c,1)(1,2)");
    <automaton>
    gap> PolynomialDegreeOfGrowth(C);
    2
    

  • AdjacencyMatrix( A ) A

    Returns the adjacency matrix of a Mealy automaton A, in which the ij-th entry contains the number of arrows in the Moore diagram of A from state i to state j.

    gap> A:=MealyAutomaton("a=(a,a,b)(1,2,3),b=(a,c,b)(1,2),c=(a,a,a)");
    <automaton>
    gap> AdjacencyMatrix(A);
    [ [ 2, 1, 0 ], [ 1, 1, 1 ], [ 3, 0, 0 ] ]
    

  • IsAcyclic( A ) P

    Computes whether or not an automaton A is acyclic in the sense of Sidki Sid00. I.e. returns true if the Moore diagram of A does not contain cycles with two or more states and false otherwise.

    gap> A := MealyAutomaton("a=(a,a,b)(1,2,3),b=(c,c,b)(1,2),c=(d,c,1),d=(d,1,d)");
    <automaton>
    gap> IsAcyclic(A);
    true
    gap> A := MealyAutomaton("a=(a,a,b)(1,2,3),b=(c,c,d)(1,2),c=(d,c,1),d=(b,1,d)");
    <automaton>
    gap> IsAcyclic(A);
    false
    

  • DualAutomaton( A ) O

    Returns the automaton dual of A.

    gap> A := MealyAutomaton("a=(b,a)(1,2), b=(b,a)");
    <automaton>
    gap> D := DualAutomaton(A);
    <automaton>
    gap> Display(D);
    d1 = (d2, d1)[ 2, 2 ], d2 = (d1, d2)[ 1, 1 ]
    

  • InverseAutomaton( A ) O

    Returns the automaton inverse to A if A is invertible.

    gap> A := MealyAutomaton("a=(b,a)(1,2), b=(b,a)");
    <automaton>
    gap> B := InverseAutomaton(A);
    <automaton>
    gap> Display(B);
    a1 = (a1, a2)(1,2), a2 = (a2, a1)
    

  • IsBireversible( A ) P

    Computes whether or not the automaton A is bireversible, i.e. A, the dual of A and the dual of the inverse of A are invertible. The example below shows that the Bellaterra automaton is bireversible.

    gap> Bellaterra := MealyAutomaton("a=(c,c)(1,2), b=(a,b), c=(b,a)");
    <automaton>
    gap> IsBireversible(Bellaterra);
    true
    

  • IsReversible( A ) P

    Computes whether or not the automaton A is reversible, i.e. the dual of A is invertible.

  • IsIRAutomaton( A ) P

    Computes whether or not the automaton A is an IR-automaton, i.e. A and its dual are invertible. The example below shows that the automaton generating lamplighter group is an IR-automaton.

    gap> L := MealyAutomaton("a=(b,a)(1,2), b=(a,b)");
    <automaton>
    gap> IsIRAutomaton(L);
    true
    

    The next three commands deal with the, so-called, MD-reduction procedure developed in AKL. Particularly, according to KLI, a 2-letter or 2-state invertible reversible automaton generates a finite group if and only if the MD-reduction procedure terminates with the trivial automaton. In this case an automaton is called MD-trivial.

  • MDReduction( A ) O

    Performs the process of MD-reduction of automaton A (alternating applications of minimization and dualization procedures) until a pair of minimal automata dual to each other is reached. Returns this pair. The main point of this procedure is in the fact that the (semi)group generated by the original automaton is finite if and only each of the (semi)groups generated by the output automata is finite.

    gap> A:=MealyAutomaton("a=(d,d,d,d)(1,2)(3,4),b=(b,b,b,b)(1,4)(2,3),\\
    >                       c=(a,c,a,c),          d=(c,a,c,a)");
    <automaton>
    gap> NumberOfStates(MinimizationOfAutomaton(A));
    4
    gap> MDR:=MDReduction(A);
    [ <automaton>, <automaton> ]
    gap> Display(MDR[1]);
    d1 = (d2, d2, d1, d1)(1,4,3), d2 = (d1, d1, d2, d2)(1,4)
    gap> Display(MDR[2]);
    d1 = (d4, d4)(1,2), d2 = (d2, d2)(1,2), d3 = (d1, d3), d4 = (d3, d1)
    

  • IsMDTrivial( A ) P

    Returns true if A is MD-trivial (i.e. if MD-reduction proedure returns the trivial automaton) and false otherwise.

  • IsMDReduced( A ) P

    Returns true if A is MD-reduced and false otherwise.

  • DisjointUnion( A, B ) O

    Constructs the disjoint union of automata A and B

    gap> A := MealyAutomaton("a=(a,b)(1,2), b=(a,b)");
    <automaton>
    gap> B := MealyAutomaton("c=(d,c), d=(c,e)(1,2), e=(e,d)");
    <automaton>
    gap> Display(DisjointUnion(A, B));
    a1 = (a1, a2)(1,2), a2 = (a1, a2), a3 = (a4, a3), a4 = (a3, a5)
    (1,2), a5 = (a5, a4)
    

  • A * B

    Constructs the product of 2 noninitial automata A and B.

    gap> A := MealyAutomaton("a=(a,b)(1,2), b=(a,b)");
    <automaton>
    gap> B := MealyAutomaton("c=(d,c), d=(c,e)(1,2), e=(e,d)");
    <automaton>
    gap> Print(A*B);
    a1 = (a1, a5)(1,2), a2 = (a3, a4), a3 = (a2, a6)
    (1,2), a4 = (a2, a4), a5 = (a1, a6)(1,2), a6 = (a3, a5)
    

  • SubautomatonWithStates( A, states ) O

    Returns the minimal subautomaton of the automaton A containing states states.

    gap> A := MealyAutomaton("a=(e,d)(1,2),b=(c,c),c=(b,c)(1,2),d=(a,e)(1,2),e=(e,d)");
    <automaton>
    gap> Display(SubautomatonWithStates(A, [1, 4]));
    a = (e, d)(1,2), d = (a, e)(1,2), e = (e, d)
    

  • AutomatonNucleus( A ) O

    Returns the nucleus of the automaton A, i.e. the minimal subautomaton containing all cycles in A.

    gap> A := MealyAutomaton("a=(b,c)(1,2),b=(d,d),c=(d,b)(1,2),d=(d,b)(1,2),e=(a,d)");
    <automaton>
    gap> Display(AutomatonNucleus(A));
    b = (d, d), d = (d, b)(1,2)
    

  • AreEquivalentAutomata( A, B ) O

    Returns true if for every state s of the automaton A there is a state of the automaton B equivalent to s and vice versa.

    gap> A := MealyAutomaton("a=(b,a)(1,2), b=(a,c), c=(b,c)(1,2)");
    <automaton>
    gap> B := MealyAutomaton("b=(a,c), c=(b,c)(1,2), a=(b,a)(1,2), d=(b,c)(1,2)");
    <automaton>
    gap> AreEquivalentAutomata(A, B);
    true
    

    [Up] [Previous] [Next] [Index]

    automgrp manual
    March 2016